• About
  • Program
  • Our Work
  • James Krenov
  • Teachers Notebook
  • Contact
Menu

IPSFC

1055 Roberts Creek Road
Roberts Creek, British Columbia
1.877.943.9663
Inside Passage School of Fine Cabinetmaking

IPSFC

  • About
  • Program
  • Our Work
  • James Krenov
  • Teachers Notebook
  • Contact

At the school

December 20, 2015 Robert Van Norman
Eric and Mirza paring pins

Eric and Mirza paring pins

Greetings from the bench room!

This week the Impractical Students have been practising cutting dovetails by hand, one of my favourite parts of our craft. The mood in here has been peaceful and focused... lovely.

Jesse, my new benchmate this session, working on a small box in Pear 

Jesse, my new benchmate this session, working on a small box in Pear 

Roger perseveres - the consequences of a pillow fight with his young son

Roger perseveres - the consequences of a pillow fight with his young son

I've been having a great time working with such determined and enthusiastic students.

Lavi cuts a plank of Pear

Lavi cuts a plank of Pear

We were delighted to welcome back our friend Lavi to the Upward Spiral program. He has begun work on a dovetailed cabinet in Pear wood, rough milling, selecting material, and practising dovetails in this very friendly but unforgiving wood.

Danielle, Tim, and Refael at work

Danielle, Tim, and Refael at work

Refael has been making good progress on his Vidar's chair, completing his rear assembly on Friday. 

Chad mocks up a leg

Chad mocks up a leg

Chad is Composing a desk of European Sycamore in his final session here, based on JK's writing desk in Italian Walnut. The top will have a slight curve to it, as in the original, and he has laminated curved aprons to follow the shape. 

Spencer checks out how it stands

Spencer checks out how it stands

Our resident craftsman Spencer has been building a substantial cabinet in Sipo, Western Maple, and Spanish Cedar. This session he has been working hard on the stand, which features veneered aprons and dowel construction. This week he cut the tapers in the legs, and bevelled them in the front to match the curve of the cabinet.

Twin mortise and tenons

Twin mortise and tenons

I finished up a small stand in Ash with twin mortise and tenons. It was quite a bit of work fitting these joints, and it reinforced what I already know - a good fit off the saw is critical. The final result I will share with you in my next post.

Tiny dovetails

Tiny dovetails

I picked up again a tiny box I started months ago but left unfinished... The sides here are just about 4 millimetres thick - an offcut of my Boxwood cabinet - I remember it was quite challenging to cut such small joints! I ran the grooves for the bottom and sliding lid, dangerously close to the joinery, but it was all good in the end. 

-

We finished the week with an inspiring evening with Gary Kent, who shared about his life and work with the school and friends from the community. His thoughts on serendipity in his life stirred up much intrigue and also for many I think, some resonance and curiosity about our own lives... 

Afterwards, in my little cabin, a small gathering around the fire with some lovely people and lots of tea… 

Next week, perhaps, I will start on something new. 

← 2016Transition →

Robert's Journal

Robert Van Norman

Caroline's Journal

ARCHIVE

The collection this block was previously pointing to has been removed. Please select another.

Archive 2005-2014

The collection this block was previously pointing to has been removed. Please select another.

CLASS YEARS

  • 2006 (1)
  • 2007 (1)
  • 2008 (1)
  • 2009 (1)
  • 2010 (1)
  • 2011 (1)
  • 2012 (1)
  • 2014 (2)
  • 2013 (3)
JK_45px.png

© 2005-2025 Inside Passage School of Fine Cabinetmaking. All Rights Reserved.

Inside passage school of fine cabinetmaking is located on keats island (Lheḵ'tínes) and the
unceded Lands of the Coast Salish peoples of the Sḵwx̱wú7mesh (Squamish) Nation